• Model: SK-100013-07
  • Weight: 2005 grams

SKYRC Quattro B6AC (110v AC version)

DC12V 2.0A Power Supply for LCD5802 Monitor
SKYRC eFuel 230W/17A Power Supply
Quantity :
Price :
US$175.90US$149.0015% off Report Cheaper Price

SKYRC QUATTRO B6AC



  • SKYRC QUATTRO B6AC is a high-performance, micro processor control charge/discharge
    station with battery management suitable for use with all current battery types. With integral
    equalizer for six-cell Lithium-Ion (LiIon), Lithium-Polymer (LiPo) and Lithium-Ferrum (LiFe)
    batteries.
  • Maximum 6A charge current; can be powered by a 12 Volt car battery or from the 110V AC(US
    Version) via the built in switch-mode power supply.
  • And the circuit features four totally independent identical power outputs which are powered 50
    watts each. Total powers are 200 watts. As a result , it can charge or discharge up to 4 x 15 cells
    of NiCd/NiMH or 4 x 6 series of Lithium batteries simultaneously. Quattro B6AC has four
    individual cell voltage balancer at each outputs, so it does not required any balancer separately
    when charging Lithium Battery (LiPo/LiIon/LiFe) for voltage balancing.
  • When a Nickel battery is fully charged, the unit terminates the process using the Delta-Peak
    method. Lithium and lead (Pb) batteries are charged using the CC-CV method.
  • The fan cooling system is so smart and efficient. The fan speed is controlled by
    internal temperature sensor.


  • SPECIAL FEATURES
  • SKYRC QUATTRO B6AC allows you to plug 4 batteries into one charger simultaneously,
    and it will intelligently and automatically charge all 4 of them at once to their maximum
    capacity. To top of it, the batteries being charged do not even need to have the same
    configuration. You can connect different chemistry(Ni-MH/Ni-CD/LiPo/LiFe)batteries into
    any of the charging ports. No more staying up late for charging batteries.
  • Optimized operating software
    SKYRC QUATTRO B6AC features the so-called AUTO function that set the feeding current
    during the process of charging or discharging. Especially for Lithium batteries, it can
    prevent the overcharging which may lead to an explosion due to the user's fault. It can
    disconnect the circuit automatically and alarm once detecting any malfunction. All the
    programs of this product were controlled through two way linkage and communication, to
    achieve the maximum safety and minimize the trouble. All the settings can be configured
    by users!
  • Internal independent lithium battery balancer
    SKYRC QUATTRO B6AC employs an individual-cell-voltage balancer. It isn't necessary to
    connect an external balancer for balance charging.
  • Balancing individual cells battery discharging
    During the process of discharging, SKYRC QUATTRO B6AC can monitor and balance
    each cell of the battery individually. Error message will be indicated and the process will be
    ended automatically if the voltage of any single one cell is abnormal.
  • Adaptable to various type of lithium battery
    SKYRC QUATTRO B6AC is adaptable to various types of Lithium batteries, such as Li-ion,
    LiPo and the new LiFe series of batteries.
  • Fast and storage mode of lithium battery
    Purposes to charge Lithium battery varies, 'fast' charge reduce the duration of charging,
    whereas 'store' state can control the final voltage of your battery, so as to store for a long
    time and protect useful time of the battery.
  • Maximum safety
    Delta-peak sensitivity: The automatic charge termination program based on the principle of
    the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the
    process will be terminated automatically.
  • Automatic charging current limit
    You can set up the upper limit of the charging current when charging your NiCd or NiMH
    battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO'
    charging mode.
  • Capacity limit
    The charging capacity is always calculated as the charging current multiplied by time. If the
    charging capacity exceeds the limit, the process will be terminated automatically when you
    set the maximum value.
  • Temperature threshold*
    The battery's internal chemical reaction will cause the temperature of the battery to rise. If
    the temperature limit is reached, the process will be terminated.
    * This function is available by connecting optional temperature probe, which is not included in the package.
  • Processing time limit:
    You can also limit the maximum process time to avoid any possible defect.
  • Data store/load
    The maximum five batteries' data can be stored for each output(4