2.4GHz Radio Adapter WL-T6 Module For V922 V933 V944 V955

Current Reviews: 0 | Add Your Review

Price :

US$19.90

Report Cheaper Price

WLtoys Radio Adapter WL-T6 Module For V922 V933 V944 V955

WL-T6 Radio Adapter can choose different ways of power supplyL:intarnal power supply and external power supply.It is perfectly compatible with different brands of RC transmitter,such as JR, FUTABA,Walkera,etc.It also has sealed rechargeable protection and low-voltage alarm function.
There is one 3.7V Li-Po Battery sealed in RF Module.If the radio controller you use can supply the power to the RF Module,please turn off the sealed battery to off status.
Please pay attention to the battery power when you use sealed battery of RF Module,if the green light is flashing,please stop to play and charge the battery
.
Supplying power of radio itself(eg:JR/Futaba) the HT-8 internal power supply switch to OFF state.ProperLy connected HT-8's signal cables and power cables.(JR signal cable connecting the remote control DSC intertace,and power cable to connect to DC charging port)(Futaba's connection is a combination of signal cable and power cable to connect simulator interface).
IF no power from radio,switch the HT-8 internal power supply to on state,properly connected HT-8 and remote control of the DSC interface.
Under normal circumstances the HT-8 light is green,when red check the signal cable if is normal,as well as check the remote control to set the modulation mode to PPM format.Set the types of remote control through switch the button of high- frequency head,the status indicator (Model),Futaba (green) JR(red).WAKERA (not light).
Charging Operation:
First put the internal power switch to OFF position,no LED lights on RF Module bright this time,then connect RF Module to a computer(or the other power supplier equipment) using USB wire.Signal indicator light starts to flash and Mode indicator light shows charging status:red means charing,turning to green means charging is over.